We are an approved supplier and installer of Solid Swivel Class A anchor devices and service agent for Abtech Safety, Kratos Safety, Betafit, Ridgegear and Globestock.
EN795 Class A Anchor Device Installation, Inspection & Testing
Velocity Safety supplies, installs, and tests EN795 Class A anchor devices used for restraint, work positioning, rope access, and fall-arrest systems.
All work is carried out in line with BS 8610 (2017), BS 7883 (2019), and EN 795 (2012) standards.
Our anchor testing service includes:
- Installation & setup – permanent or temporary anchors fitted to manufacturer and structural specifications.
- Pull testing & verification – load-tested using calibrated digital equipment with live data capture and GPS traceability.
- Compliance documentation – detailed certificates and inspection reports for your PUWER and Work at Height records.
- Re-inspection reminders – we log your equipment and notify you when the next test is due.
Every system is verified to withstand its intended loads – whether that’s roof-edge restraint, façade access, or rescue – giving you clear, audit-ready evidence of compliance.
Where EN795 Class A Anchors Are Installed and Tested
Anchor devices are used across a wide range of environments where reliable connection points are essential for safe work at height, rope access or rescue.
- Roof work – roof anchor testing, inspection and certification for workers carrying out inspection, maintenance, cleaning, solar PV installation or repairs.
- Leading-edge operations – for restraint and fall-arrest protection along open edges.
- Rope access and façade work – including vertical or inverted access below ground.
- Confined-space entry – providing stable anchorages for recovery and rescue systems.
- New-build construction – prior to edge protection or as part of permanent works.
- Prefabrication and modular build facilities – for assembly-line access and handling tasks.
- Civil engineering and bridge works – where fall protection is required during installation or inspection.
- General work at height – any site where no certified anchor system currently exists.
What You Need to Know About EN795 Anchor Devices
Personal Fall Protection Systems (PFPS) differ dependent on the system of work being undertaken.
Restraint Systems are used to prevent the user from reaching zones where the risk of a fall from height exists.
Work Positioning Systems use a personal fall protection system as the primary means of support and either a separately connected safety back up system or a collective fall protection system.
Rope Access Systems enable the user to get to and from the place of work in such a way that a free fall is prevented or arrested, by using the working line and a safety line connected separately to anchor points.
Fall Arrest Systems limits the impact force on the body of the user during fall arrest.
Different Systems impose different loadings on the anchor device. The pull testing requirements can also differ.
Generally for restraint and fall arrest purposes the anchor device should be pull tested at least every 12 months.
For rope access, rescue and devices used to raise and lower people. It should be tested at least every 6 months to comply with Regulation 9 of the Lifting Operation and Lifting Equipment Regulations 1998.
Anchor Services We Provide
We support contractors, consultants and site teams with end-to-end fall protection compliance. Choose the service you need:
1. Anchor Installation (Permanent & Temporary)
- EN795 Class A, C and D anchor devices
- Roof anchors, eyebolts, façade anchors & safety lines
- Installed to BS8610:2017 and manufacturer specs
- Load-rated for restraint, fall arrest or rope access
- Full system technical file & handover documentation provided
Best for: Solar PV contractors, roofing teams, new-build sites, FM providers.
2. Anchor Point Inspection & Recertification
- 12-monthly testing for fall arrest / restraint
- 6-monthly testing for rope access & rescue anchors
- Structural checks, corrosion assessment, fixing verification
- Recorded in your PUWER / Work at Height register
- Pass/fail tagging and photographic evidence
Best for: Facility managers, industrial sites, rope access companies.
3. Pull Testing & Load Verification
- Digital pull testing using calibrated equipment
- GPS traceability + live load/displacement data
- Proof testing before handover or following repairs
- Independent audit testing for insurers or consultants
- Re-testing after anchor failure or refurbishment
Best for: Auditors, compliance managers, client handovers, remedial verification.
What Documentation You Receive (BS7883 & BS8610 Requirements)
To keep your anchors legally compliant and audit-ready, every installation or inspection includes:
- System Technical File – anchor selection, method, specification, load class
- Design & Installation Record – produced in line with BS8610:2017
- Inspection & Test Certificate – kN load applied, pass/fail result, GPS trace, photos
- O&M / Maintenance File – outlines how the system must be maintained
- Examination Scheme – required re-test intervals and conditions under BS7883:2019
This is the exact documentation auditors, insurers and H&S consultants expect to see during periodic inspections.
What You Get With Every Anchor Test
Every inspection or pull test includes:
- Digital load test results (kN) recorded with calibrated equipment
- GPS traceability for complete transparency
- Photographs of every anchor tested
- Unique anchor ID tags with pass/fail status and retest date
- Defect identification & remedial recommendations
- Free re-test after remedial work (once safe)
- Audit-ready PDF report delivered rapidly
- Updated inspection register to support PUWER / Work at Height compliance
This level of evidence is exactly what insurers, auditors and procurement teams now expect.
Our Fall Arrest Anchor Installation & Testing Process
Anchor systems are only as safe as their last inspection. We follow a structured process to ensure every fixing, weld, and connection point is fully verified and compliant with BS 8610, BS 7883, and EN 795.
1. Initial Site Survey
We assess the work environment, roof type, and proposed anchor positions to confirm suitability, load capacity, and regulatory compliance.
2. Anchor Installation (if required)
Our engineers install permanent or temporary anchors using approved fixings and manufacturer-recommended materials – suitable for restraint, rope access, or fall arrest use.
3. Inspection & Load Testing
Every anchor is load-tested (pull or torque) with calibrated digital equipment featuring GPS traceability, ensuring verified performance under real-world loads.
4. Compliance Certification
You’ll receive a digital inspection report, installation record, and technical file confirming compliance with all relevant British Standards.
5. Log & Reminder System
All assets are recorded in your inspection register, and we’ll notify you automatically when the next re-test is due – keeping your site audit-ready year-round.
If an anchor fails testing, we’ll identify the issue, advise on remedial options, and re-test once corrective action has been taken.
Why choose Velocity Safety Ltd
Why choose Velocity Safety Ltd for EN795 Class A Anchor Device Installation, Inspection and Testing requirements
- Our technicians are trained by leading manufacturers and suppliers.
- We are an approved supplier and installer of Solid Swivel Class A anchor devices.
- We are trained in working at height and hold IPAF, PASMA, Ladder Association and personal fall protection equipment qualifications.
- Over 12 years experience in the health and safety industry.
- Fully demonstrate compliance with BS8610:2017 and BS7883:2019.
- Fully Insured.
- We use the latest digital pull tester with Bluetooth and GPS technology for complete transparency and traceability.
- We use fully calibrated testers calibrated every 12 months.
- Our reports fully comply with the BS8610:2017 and BS7883:2019.
Who Needs Fall Arrest Anchor Installation & Testing?
Anchor systems form the backbone of any safe work-at-height setup. Whether you own, manage, or install them, we help ensure your anchors meet BS EN 795, BS 7883 and BS 8610 standards – protecting workers and keeping your sites compliant.
Facilities & Estate Managers
Responsible for building safety? We provide scheduled inspections and testing for roof anchors, plant-room access points and façade maintenance systems, keeping sites compliant year-round.
Construction & Fit-Out Contractors
Installing new anchors or temporary systems? We handle installation, pull testing and all required documentation before handover to your client.
Roofing & Cladding Specialists
Whether you’re working on pitched, flat or metal roofs, we test and certify anchors for restraint and fall arrest – ideal for reactive maintenance or ongoing refurbishment.
FM & Building Services Companies
Delivering maintenance across multiple sites? We act as your compliance partner for regular anchor re-testing and reporting across client portfolios.
Rope Access & Façade Maintenance Teams
Your rope systems rely on secure anchor points. We carry out 6-monthly pull testing and certification to meet BS 7883 and EN 795 for rope access operations.
Manufacturing, Energy & Industrial Sites
We test roof, wall and plant-mounted anchors across factories, refineries and industrial environments – keeping your access systems audit-ready.
Wind Energy & Renewable Sites
We support turbine contractors needing BS7883-compliant technical files, O&M documentation and periodic inspection schemes – essential for turbine access and insurer audits.
Consultants & Compliance Managers
We support H&S and compliance professionals with independent anchor inspection reports and traceable evidence for PUWER, LOLER and Work at Height audits.
Solar PV Installers
Flat-roof PV installations often rely on long-run restraint lines and multiple fixing points. We install and test permanent or temporary anchors to ensure safe work during and after the installation phase.
Whatever your EN795 Class A Anchor Device Installation, Inspection and Testing requirements, you can be sure your in honest, reliable, safe hands.
Contact Velocity Safety today 01254 933 486 or Contact Us
What Others Say About Us…
Clients say our anchor testing gives them full confidence in their systems – from site install to annual compliance checks.
“After many issues with the inspectors from our insurer I contacted Ross to quote. He saved us just over £3000 in the first year. He also does weekends for us to reduce downtime.”
Joe, Civils Company Midlands
“After spending £20k purchasing the wrong powered air units for our factory on our previous PPE supplier/H&S advisors recommendations, Ross came in and told us what we needed, why we needed it and what cost savings could be had over the life of the equipment. I just wish we found him sooner.”
David, Engineering Company North West
“Great Service, Great guy nothing is too much trouble.”
John, Groundworks Company North West
Other Services Available:
We provide complete end-to-end fall protection compliance – from fixed anchor testing to the inspection of connected PFPE and rescue systems.
- Supply EN795 Eyebolts and Anchor Devices for a variety of materials.
- Supplier and distributor of Personal Fall Protection Equipment.
- Authorised Abtech Safety Repair and Service Agent.
- Authorised Ridgegear Repair and Service Agent.
- Authorised Globestock Repair and Service Agent.
- Inspection, examination and maintenance for a wide range of personal fall protection equipment.
- Fall Arrest Block Servicing & Inertia Reel Testing – ensure your fall arrest blocks are tested, certified, and compliant under LOLER and PUWER.
- Eyebolt and Anchor Pull Testing Service.
- Davit Arm Installation & Pull Testing – for confined space and rescue systems.
Frequently Asked Questions – Fall Arrest Anchors
Anchor points are a vital part of safe working at height. Here’s what our clients usually want to know:
Is anchor testing a legal requirement?
Yes. Under the Work at Height Regulations and PUWER, all anchor points must be inspected and load-tested by a competent person. Fall arrest and restraint anchors must be tested at least every 12 months – or every 6 months if used for rope access or rescue – in line with BS7883 and BS8610.
How do I know what type of anchor I need?
The correct anchor depends on your structure, surface material, and intended use. EN795 Class A anchors are typically fixed eyebolts or bolts for single-user restraint or fall arrest, while EN795 C and D systems cover horizontal or rigid lines. We’ll assess your site and recommend the safest, most compliant option.
What standards do you follow?
All testing and installation work follows BS 7883:2019 (system design and inspection), BS 8610:2017 (anchor installation and testing) and BS EN 795 (performance of anchor devices). We also align with HSE guidance and manufacturer specifications to maintain full compliance.
What types of anchors can you test?
We test EN795 Class A, C and D devices, including eyebolts, roof anchors, safety lines, façade anchors, davit arms, rescue anchors and confined space systems.
What if my anchors haven’t been tested in years?
They’re likely non-compliant. We can perform a full inspection, identify corrosion or structural concerns, re-test to current standards, and issue new certificates. If any anchor fails, we’ll guide you on safe removal or replacement.
Can you install temporary systems too?
Yes. We install and certify temporary EN795 anchors for short-term works, roof access, or façade maintenance – ideal for contractors and project-based teams.
Do you provide anchor point surveys before installation?
Yes – we assess structural suitability, substrate condition, fixing type, load paths and positioning before any installation to ensure compliance with BS8610 and prevent failed installations.
Is anchor pull testing always necessary after installation?
Yes. New anchors must be proof-tested before use to confirm installation quality and substrate integrity. This is a core requirement under BS8610.
What happens if an anchor fails the test?
We’ll mark it “Do Not Use,” record the defect, and provide remedial advice. Once repairs or replacements are made, we’ll re-test and update your compliance record.
Can you replace or repair anchors that fail testing?
Yes. Where possible, we can advise on remedial options, replacement anchors, re-installation or re-testing after corrective work. If an anchor is unsafe, it should be clearly marked as failed and removed from use until the issue is resolved.
What happens if an anchor has no documentation?
We can create a compliant technical file, installation record and examination scheme based on current condition, substrate strength and test results. This is often required for older buildings or previously uncertified anchors.
Do you provide anchor point inspection tags or labels?
Yes. We can provide anchor inspection tags, labels or ID references showing pass/fail status, inspection date and next test due date. This helps site teams quickly identify whether an anchor point is in date and safe to use.
Can I still use anchors while waiting for recertification?
No. If the inspection date has expired or testing is overdue, the system is deemed non-compliant under PUWER and Work at Height regulations. It must not be used until re-certified.
How often do fall arrest anchors need to be tested?
Restraint and fall arrest anchors require 12-monthly testing. Rope access and rescue anchors must be tested every 6 months. Temporary anchors must be tested before use and after any load event.
What load should anchor points be tested to?
The applied load depends on the anchor class, installation method and manufacturer requirements. During testing, we apply the correct kN load for that specific anchor and record the results digitally.
Do you issue digital certificates?
Yes. Every inspection includes a digital certificate with test loads, anchor IDs, GPS traceability, and next-due dates – all ready for your audit or insurance file.
Do you install and test anchor points nationwide?
Yes – we provide nationwide coverage with strong presence across the North West. We test anchors for facilities in Preston, Blackburn, Manchester, and across the UK, including Birmingham, Leeds, and London.
Are you qualified to handle anchor installation and testing from major manufacturers like RIDGEGEAR?
Absolutely. We’re approved service agents for RIDGEGEAR, Abtech Safety, Globestock and Betafit. Our engineers are trained to inspect, repair and certify their full range of anchor devices, SRLs and fall protection equipment.
How is an anchor pull test performed?
A calibrated digital tester applies a controlled load to the anchor to simulate real-world fall forces. The reading confirms whether the fixing can safely support the required kN value for its class and application. The result is recorded and included in your compliance report.
What documentation will I receive after testing?
You’ll receive a digital inspection report, calibration traceability, and a compliance certificate for each anchor – including load data, pass/fail results, photographs, and next inspection due date.
Book Fall Arrest Anchor Testing
From eyebolts to horizontal lines, we test anchor systems for strength and compliance. Full documentation provided – ideal for work-at-height audits and contractor assurance.
01254 933 486
info@velocitysafety.co.uk
Velocity Safety
Unit 7 Whitebirk Enterprise Centre,
Lower Phillips Road,
Blackburn,
Lancashire
BB1 5UD
