Workplace Safety Compliance Guides
“A tag on the outside doesn’t tell you what’s happening on the inside.” Many businesses assume that if a fall arrest block has an inspection tag attached, it must be […]
“A supplied air respirator system is much more than just a compressor. Every part of the installation plays a role in keeping your workforce protected and your business compliant.” Installing […]
“Saving money on day one means very little if the equipment can’t be repaired five years later.” When businesses buy fall arrest equipment online, the purchase price often becomes the […]
“Installing fire extinguishers properly is about far more than putting a red box on the wall.” Most people think a fire extinguisher installation simply involves fixing extinguishers to the wall […]
“Buying safety equipment is easy. Knowing who will maintain it in five years’ time is the difficult part.” Buying health and safety equipment online has never been easier. Within a […]
“Testing a floor before it’s installed is usually much cheaper than replacing it afterwards.” Slip resistance is often only considered after someone has had an accident or once a newly […]
“Cheap doesn’t have to mean non-compliant.” Yes, you can buy refurbished or older fire extinguishers, but only if they are still safe, suitable, serviceable and properly commissioned before use. A […]
CAT4, CAT4+, C.Scope and Radiodetection tools all help reduce cable strike risk, but they are not all designed for the same level of locating work. Cable avoidance tools are used […]
If you’ve ever seen someone being lowered into a manhole, rescued from a confined space, or working safely over the edge of a rooftop, there is a good chance a […]
A failed inspection does not always mean your fall arrest equipment has to be replaced. Sometimes the bigger problem is whether anyone can legally repair, service or recertify it. When […]
Your LEV system can have a recent inspection report and still not be working properly on site. If your Local Exhaust Ventilation system has a recent inspection report, it is […]
Buying a new air compressor does not automatically mean it is ready to use under PSSR. A new air compressor can arrive with manuals, CE/UKCA marking and manufacturer paperwork, but […]
A davit arm can look fine on the surface and still fail inspection if the paperwork behind it is missing. If your davit arm, socket or anchor system has failed […]
How Multi-Discipline On-Site Safety Inspections Work: Gas Monitors, Tripods, Winches & Fall Arrest Blocks Some jobs aren’t one-discipline visits. For many clients – especially those working in confined spaces, utilities, […]
When a large vessel docks for a tight turnaround, every hour matters. When that vessel is staring down £300,000 per day in delay costs, every hour really matters. Velocity Safety […]
When it comes to fall arrest blocks, inertia reels, harnesses and lanyards, it’s easy to assume that “any competent tester” can service or inspect them. But personal fall protection equipment […]
A lot of businesses believe LEV systems need a Thorough Examination & Test (TExT) every 14 months. It’s one of the most commonly repeated “facts” in health & safety. And […]
When a business books a LEV test, noise assessment, HAVS measurement, air purity test, or PSSR inspection, one assumption is quietly made: “The readings will be accurate.” They only are […]
Working safely at height on mobile access towers means being prepared for emergencies. A clear, step-by-step rescue plan is essential to protect your team if something goes wrong. Here’s a […]
At Velocity Safety, we’re always investing in the latest technology to provide our clients with the most accurate and efficient safety testing services. Recently, we took delivery of a new […]
Portable dust extraction plays a vital role in protecting workers from hazardous dust exposure. However, many sites struggle with a simple but significant issue: connecting dust extractors to tools correctly. […]
Fire safety is critical – but so is getting good value for your money. Unfortunately, overselling of fire extinguishers, stands, signage, and ancillary equipment is common in the industry. Many […]
Fall arrest blocks and inertia reels look similar – but they behave very differently when someone falls, moves, or works at height. Choosing the wrong device increases free-fall distance, raises […]
Gas detectors protect lives – but only if they’re calibrated often enough to stay accurate. Sensor drift, environmental contamination and ageing components can all cause a detector to under-read or […]
If you’ve been struggling with renewing CHAS SSIP accreditation, you’re not alone. A recent client was caught in the nightmare of an expired Veriforce CHAS certificate – unable to complete […]
Most fall arrest blocks passed to us look ‘fine’ on the outside – but once opened, we often find worn components, weak springs, contamination and brake issues that would never […]
Many compressors and their air receivers don’t get the proper maintenance or examination routines they legally require. Part of the reason? The Pressure Systems Safety Regulations 2000 (PSSR 2000) isn’t […]
Late Friday afternoon, a client contacted us needing urgent commissioning of new fire extinguishers for a site they were working on. They hadn’t realised that newly purchased extinguishers must be […]
Not all workers are exposed to the same levels of noise – yet most assessments treat them as if they are. That’s where personal noise dosimeters like the doseBadge come […]
Thorough examinations of lifting accessories are exactly that – thorough. When lifting chains are covered in surface rust, a simple visual inspection isn’t enough. Rust makes it harder to spot […]
Fire extinguishers are life safety equipment. To stay compliant, they need routine visual checks, regular servicing by a competent person and clear records showing they have been maintained properly. The […]
“Face fit testing can feel like a mystery if you’ve never been through one.” People often worry about whether they’ll “taste chemicals”, whether the machine will hurt, or whether they […]
Lots of UK businesses assume that any facilities engineer, caretaker or “handy person” can do the annual fire extinguisher service. In reality, the law splits things into two roles: A […]
“When your team relies on respirators to stay safe, the seal either works, or it doesn’t.” When your team relies on respirators to stay safe, the seal either works, or […]
Hand-Arm Vibration Syndrome (HAVS) is a serious occupational hazard, and accurately assessing risk starts with understanding how your tools behave in the field – not just what the manufacturer says […]
Accurate noise monitoring is more than just taking a one-time measurement. To effectively protect workers and comply with regulations, you need properly calibrated equipment and consistent follow-ups to catch changes […]
Recently, Velocity Safety onboarded three new clients – all frustrated by other suppliers’ inflexibility or inability to complete vital safety work on time. Client Spotlights When providers fall short, the […]
BS 5306 is the recognised standard for proving your fire extinguishers are correctly selected, positioned, commissioned and maintained. Fire extinguisher compliance in the UK is governed by BS 5306, the […]
“A fire extinguisher isn’t rubbish – it’s pressurised hazardous waste.” Fire extinguishers can’t just be thrown in a skip or recycling bin. They’re pressurised containers filled with chemicals that, if […]
“Unboxed doesn’t mean ready for use.” Every new fire extinguisher must be commissioned on-site before it’s legally compliant. It’s one of the most misunderstood parts of fire safety – and […]
Most people think P3 filters are created equal. They’re not. If you’re buying powered respirators for a bearded workforce, or looking for a face-fit-free RPE option, don’t just compare models […]
Temperature isn’t the first thing most people think about with fire extinguishers – but it should be. If a unit is stored somewhere too hot or too cold, it may […]
On a live construction site, a fire point has to work first time – signage clear, stands stable, and extinguishers ready to use. We recently helped a new construction client […]
Air compressors seem like set-and-forget tools – plug them in, pressurise, and get on with the job. But hidden inside the vessel is a rust time bomb if you’re not […]
Yes – and it’s one of the most commonly overlooked compliance gaps in workplaces using on-tool extraction. Portable dust extractors are often treated like ordinary site vacuums. But when they […]
Reusable respiratory protection requires ongoing attention – not just a one-off setup. Whether you’re using tight-fitting face masks, airline-fed systems, or half-masks for spray booths or COSHH controls, RPE must […]
One Stand. Three Emergencies. Zero Hassle Most site safety kits are cobbled together from different suppliers, held together with cable ties and crossed fingers. We’re doing things differently. This all-in-one […]
The Pressure Systems Oversight That Could Get You Fined – or Worse A surprising number of sites run air compressors that technically fall under the Pressure Systems Safety Regulations 2000 […]
Off-the-Shelf Isn’t Always Enough When it comes to emergency preparedness, most stands and signage kits fall short. The templates are basic, the materials aren’t built for site use, and the […]
The wrong extinguisher in the wrong place can cost you money, compliance, and real protection when it counts. We recently came across a purple-labelled Class D extinguisher sat next to […]
We’ve carried out breathing air testing for several years – but we’ve now upgraded to a digital unit to give our clients even more traceability, speed, and accuracy. New Equipment […]
Every year, we service and calibrate our own kit – not because we have to, but because doing things right starts with the tools we use. What We Calibrate We […]
We’ve all seen fire point stands at outdoor sites telling people to “leave the building” – even when there isn’t one. At Velocity Safety, we think compliance should be smarter […]
Every site is different – but the goal is always the same: deliver full compliance with minimal disruption. Here’s a recent Friday job from the Velocity Safety team. Supporting On-Site […]
HEPA filters aren’t “fit and forget.” Whether you’re running a cleanroom, a spray booth, or a negative pressure unit, you have a legal duty to prove your filters are working […]
Discover how Pendulum Slip Testing measures real-world floor safety – and what your PTV score actually means. The Pendulum Slip Test (also known as the British Pendulum Test) is the […]
CAT & Genny calibration keeps your detection equipment accurate, compliant, and ready to prevent costly underground strikes. Used every day across construction, utilities, and civil engineering, the Cable Avoidance Tool […]
Stay compliant, stay protected – even when your site moves. Whether you’re managing a construction site, outdoor event, or temporary facility, fire safety isn’t optional – but wall-mounting extinguishers often […]
Gas detector calibration protects lives – and keeps you legally compliant. Gas detection units (GDUs) are essential for identifying hazardous atmospheres – but their accuracy degrades over time. If not […]
Understand how HAV testing protects workers and keeps your business compliant. This guide breaks down the components of a proper HAV risk assessment – from legal exposure limits and exposure […]
